Gallagher Water Flow Indicator 32 mm
$89.99
$75.00
Incl GST
Incl GST
Dispatch Options
Availability
To take the pain out of finding leaks in an irrigation system, use a water flow indicator. By installing water flow indicators along a water line at important junctions, you will be able to visually check for an abnormal flow.
Full Details
SKU#: 141433
- Dual colour impeller shows the water direction and speed so leaks are easily identified
- Easy to clean: Union joint allows the indicator to be unscrewed and dirt and algae removed
- Compatible with standard pipe fittings
- 16 Bar high-pressure rating
- Manufactured from UV-protected materials
Specifications
| Suitable for | Use within an irrigation system. |
|---|
Product Conditions
| Purchasing terms | All prices are stated in New Zealand Dollars and all credit card payments through store.pggwrightson.co.nz will be processed in New Zealand Dollars. Product images are for illustrative purposes only. The information is not designed as a substitute for specific advice. If professional advice or other expert assistance is required, you should retain the services of a competent and independent professional adviser. Always use professional advice for critical work or procedures or where you are unsure of any stated figures or information. No part of this information may be reproduced, stored, or transmitted without our prior written permission. PGW's terms of trade apply to any services and products that we supply you. |
|---|---|
| Promotion conditions | Valid from 1 October 2025 to 30 November 2025 unless specified otherwise or extended (but not before 7.30am on the first, or after 5pm on the last, day of that period) or while stocks last. May not be available in all stores but may be ordered on request. Prices include GST and are subject to change. PGG Wrightson promotions do not apply to quotes or bulk rates unless otherwise stated. |
Reviews
Customer Reviews
5
Does the job and saves time
Review by
PJ
on
I had a leak in one of the water pipes on the farm and after 6 hours one walking all the paddocks to the troughs I still couldn't locate the leak. So I decided to put shut off valves at key junction locations to start to isolate where the leak was located but it was still going to be a painful process of turning the water back on. The water flow indicators once installed allowed me to isolate the leak to a specific section of the farm without more waste of water. Then follow the pipe and find the leak. The only issue was my water pipes are 20mm but a few reducing adapters and it was all working fine.