RXP Tank Fitting and Back Nut
Dispatch Options
Availability
Full Details
SKU#: PID01532
To install the fitting and back nut, apply an adequate cover of thread tape to the length of the thread. Insert the thread tape covered thread into a corresponding thread (i.e. male inserts into female thread or vice versa) and tighten to secure. Use thread tape or sealant on all threaded connections.
- Meets the requirements for potable water quality AS/NZS 4020
- Suitable for use above and below ground
- UV stabilised and will not corrode
- BSP and BSPT threads won’t distort
- Superior joint sealing
- 15 mm to 50 mm (½”-2”), 1600kPa (235 psi, 16 Bar)
Specifications
| Pressure rating | 1600kPa (235 psi, 16 Bar) |
|---|---|
| Suitable for | Rural irrigation |
Product Conditions
| Purchasing terms | All prices are stated in New Zealand Dollars and all credit card payments through store.pggwrightson.co.nz will be processed in New Zealand Dollars. Product images are for illustrative purposes only. The information is not designed as a substitute for specific advice. If professional advice or other expert assistance is required, you should retain the services of a competent and independent professional adviser. Always use professional advice for critical work or procedures or where you are unsure of any stated figures or information. No part of this information may be reproduced, stored, or transmitted without our prior written permission. PGW's terms of trade apply to any services and products that we supply you. |
|---|



